NB - 3 и NB - 4

    Mud pump NB-4 160/6,3

    Mud pump NB-160/63 is intended for delivery of drilling fluid during drilling of exploration wells to a depth of up to 2000 m different types of rock cutting tools.The pump works in climatic temperate, dry and humide tropical at temperatures from 5°C to + 40°C.
    The operation of the pump at temperatures below 0°C should be provided with conditions that prevent the freezing mud.

    As the washing liquid can be applied emulsion and water. The pump is used for pumping liquids with a specific gravity (density) of up to 1.2 g/cm3; viscosity up to 35S on viscosity analizer SST-5, containing sand and slurry to 4.5% (by weight).

    When the production of ball valves included in the kit, the pump can be used for pumping cement and glinotsementnyj cement slurries with parameters: specific gravity (density) up to 2 g/cm3, a viscosity of up to 60C on SST-5 with solids content up to 10%.

    The pump can be used in other sectors of the economy. The pump is designed for pumping chemically active environments that affect the durability of the seals, plungers and valves. The pump is not designed to work in areas hazardous gas and dust.

    The pump drill NB 4 - 160/6.3 is available in three versions:

    1. with a pulley,

    2. with motor drive

    3. with hydraulic drive

    Specification

    Pump capacity 8-160 lit/min.
    Pressure:
    - with plunger diameter 70 mm 6,3 MPa
    - with plunger diameter 45 mm 4,5 MPa
    Drive power      11 kWt
    Weight 520 kg
    Dimensions 1230х830х1470 mm

    1. Mud Pump NB-4 160/6,3 (4036.6182.003) исп. 1

    Насос буровой НБ-4 160/6,3 (4036.6182.003) исп. 1
    1 Engine 4 АМ132М4;
    2 Bracket (4030.1132.094) ;
    3 Handle;
    4 Gearbox (51-1700010) with pulley (4030.2552.013);
    5 Slide (3130.1153.005);
    6 Pump (4030.6161.004);
    7 Discharge line (4030.1431.129);
    8 Cover.8345.003;
    9 Suction line 3130.1431.059;
    10 Belt -1320Т(III) GOST 4.1-80;
    11 Earthing bolt.

    2. Mud pump NB-4 160/6,3 (4036.6182.003) исп. 2

    Насос буровой НБ-4 160/6,3 (4036.6182.003) исп. 2
    1 Pump (4030.6161.004)
    2 Discharge line (4030.1431.129)
    3 Gearbox (51-1700010) with pulley  (4030.2552.013)

    3. Pump 4030.6161.004

    Насос 4030.6161.004
    1 Cover (4050.6232.138);
    2 Parfume (4040.9511.023);
    3 Bearing SSP-25ТУ-37-553-130-90;
    4 Finger (4040.1161.211);
    5 Guide (4040.3542.036);
    6 Sleeve 1-55х45-2 GOST  14896-84;
    7 Slide 4040.2346.004;
    8 Clamp (3130.1222.004);
    9 Gland plunger (4030.4311.025);
    10 Ring 080-090-58-2-2 GOST  9833-73;
    11 Spring (3150.9113.128);
    12 Hydraulic unit (4050.1168.004);
    13 Valve (4030.7514.005);
    14 Saddle (4040.5781.001);
    15 Ring (042-050-46-2-2 GOST 9833-73;
    16 Valve (3140.4623.001);
    17 Rod (4040.3524.004);
    18 Guide (4040.9135.003);
    19 Sleeve (3140.4151.001);
    20 Cork (3140.9516.005;
    21 Carter (4050.1718.003);
    22 Gear wheels (4040.6134.019);
    23 Rod (3140.8477.002);
    24 Bearing 6-220А GOST  8338-75;
    25 Crankshaft (3140.8374.001);
    26 Sector impeller (3130.1311.001);;
    27 Bearing 406 GOST  8338-75;
    28 Pinion shaft (4040.6114.067);
    29 Bearing  407 GOST  8338-75;
    30 Sleeve 1.1-45х65-1 GOST  8752-79;
    31 Bearing 53611 GOST 24696-81.

    1. Installing the ball valve

    Установка шаровых  клапанов
    1 Cover (3140.8442.001;
    2 Ball  (36.512-200);
    3 Saddle (4040.4543.002);
    4 Rod (4040.3524.004).
     

    2. Gland plunger d. 70 mm (4030.4311.025)

    Сальник плунжера д. 70 мм (4030.4311.025)
    1 The plunger in assembly (4030.7513.004);
    2 Nut (3140.3443.015);
    3 Socket (4040.5165.001);
    4 Sleeve 1-85х70-2 GOST 14896-84;
    5 Plunger (4040.1161.212);
    6 Ring 090-100-58-2-2 GOST 9833-73;
    7 Ring 054-060-36-2-2 GOST 9833-73.

    3. Gland plunger d. 45 mm (4030.4311.026)

    Сальник плунжера д. 45 мм (4030.4311.026)
    1 The plunger assembly (4030.7513.005);
    2 Nut (3140.3443.019);
    3 Socket (4040.5165.002);
    4 Sleeve 1-55х45-2 GOST 14896-84;
    5 Plunger (4040.1161.213);
    6 Ring 090-100-58-2-2 GOST 9833-73;
    7 Ring 029-035-36-2-2 GOST 9833-73.

    4. Discharge line 4030.1431.129

    Линия нагнетания 4030.1431.129
    1 Valve (313.8611.001);
    2 Housing(3150.8363.005);
    3 Stocking(3140.9251.001);
    4 Damper body  (3140.8453.001);
    5 Flange (4040.8447.004);
    6 Nut (3140.3157.004);
    7 Nut (3140.9835.020);
    8 Rod (4040.2435.002);
    9 Spring (4040.9113.215);
    10 Index (4050.5432.263);
    11 Ring 025-031-36-2-2 ГОСТ 9833-73;
    12 Gauge МPЗ-10 МPах1,5;
    13 Adapter (4040.1193.003);
    14 Screw ВМ8х20 GOST 1477-84;
    15 Ring 032-040-46-2-2 GOST 9833-73;
    16 Sleeve dy6 (4030.1434.203);
    17 Saddle (3140.3181.013);
    18 Ring 035-041-36-2-2 GOST 9833-73;
    19 Screw М10х20 GOST 7796-70;
    20 Clump (4030.1222.011);
    21 Pipe (4040.1263.004).

    5. Gear box with pulley 4030.2552.013

    Коробка передач со шкивами 4030.2552.013
    1

    Plug (3140.4321.001);

    2 Ring B38 GOST 13943-86;
    3

    Sleeve (4030.3141.889);

    4 Cover (4040.5382.009);
    5 Bearing 110 GOST 8338-86;
    6 Pulley  (4040.5396.005);
    7 Sleeve 1.1-65х90-1 GOST 8752-79;
    8 Gear box 51-1700010;
    9 Plug 262513-P;
    10 Socket (4040.3542.037);
    11 Sleeve 1.1-85х110-1 GOST 8338-75;
    12 Bearing 115  115 ГОСТ 8338-75;
    13 Pulley (4040.5396.003);
    14 Bushing(4040.3141.890);
    15 Cover (4040.5396.004);
    16 Nut (4040.3123.008).