Pumps NB-32 и NB-50

    When drilling, use the pump NB 32 for supplying washing liquid. To operate this pump may be at different temperatures (from-50 C to +40 C). The washing liquid may be water or various emulsion, a basic requirement for which is:

    density;
    viscosity;
    the amount of sand;
    the number of cuttings. 
    Equipped with ball valves pump NB 32 can be used for pumping a variety of complex solutions, which must have certain parameters:

    density;
    viscosity;
    solid particles in the composition.
    If you need a good quality pump for drilling rig, the best option will be to purchase it at Drilling Technologies Factory, which specializes in the development and production of such pumps.

    The factory has extensive and fairly strong manufacturing base and highly qualified professionals, consisting of staff, proposes to develop any spare parts for a variety of drilling rigs.

    A distinctive feature of the factory is one of continuous improvement, expansion of range of services and products, and low prices, which you will not find anywhere else in the production!

    NB, NB50 - mud pumps horizontal, two-cylinder, double-acting, drive with built-in gear reducer and are designed to discharge washing liquid (water, mud) in the hole in exploration and stratigraphic drilling for oil and gas. Mud pumps are also widely used in the food, chemical and construction industries for pumping various non-aggressive liquids.

     
    DescriptionPower,
    kW
    The diameter of
    the cylinder liners, mm
    Volume flow,
    dm3/sec (m3/h)
    Highest pressure,
    MPa
    NB32 32 80 5,0(18,0) 4,0
    90 6,4 (23,0) 4,0
    100 7,9 (28,4) 3,2
    110 9,8 (35,3) 2,6
    NB50 50 90 6,5 (23,4) 6,3
    100 8,2 (29,5) 5,0
    110 9,9 (35,6) 4,1
    120 12,0 (43,2) 3,4

     

    DescriptionPhoto
    1

    Piston rod typesetting

    2

    Piston rod NB32.02.501

    3

    Stem the slide NB32.01.002

    4

    Piston dial-Ø90 mm.

    5 Piston dial-Ø100 mm.
    6

    Piston dial-Ø110 mm.

    7

    Piston rod nut 11D-1-10

    8

    Ball for ball seat Ø50mm.

    9

    Ball seat

    10 Ø90 mm cylinder sleeve. NB32.02.102-01
    11

    Cylinder sleeve Ø100 mm. NB32.02.102-01

    12

    Cylinder sleeve Ø110 mm. NB32.02.102-02

    13

    Cylinder sleeve Ø120 mm. NB32.02.102-03

    14 Rubber washer typesetting piston thicknesses 10mm.  
    15

    Washer metal typesetting piston

     
    16

    Valve cover NB32.02.002

    17 Gasket 11G-3-14  
    18 Cylinder cover  NB32.02.001
    19 Ring spacer NB 32.02.104
    20 Seal sleeve NB 32.02.103  
    21 Sleeve 11GrI.04.004
    22 Crosshead NB40.00.005А-01  
    23 The spherical compensator KS -10.00.00.000  
    24 Manometr MP3 100  
    25 Valve receiving NB.32.00.400  
    26 The three-way valve NB 40.01.110
    27 Diaphragm KS-10.04.00.000-1  
    28

    Cylinder block NB 32.02.101

     
    29 Hose for rinsing wells 38Х58, (m)